How to configure your Nokia phone for Multi User VoIP

Getting Started

This document is based on the understanding that you have already configured the device to connect to your wireless access point, and you have defined the connection.

If you are configuring a Nokia N80 please ensure that the device is loaded with the N80ie firmware ; a generic N80 will NOT work due to the lack of a SIP client.

Your phone needs to be running firmware V4.0632.0.38 or higher.

Walkthrough video

To help you set up the service you can watch our walkthrough video below. You can pause and rewind as necessary, and use it along with the notes below.

Basic Configuration

If your account is registered on sip.gradwell.net, then please follow these instructions.

From Menu, select Settings, then select Connection, scroll down and select SIP Settings. Press the Options soft key, select Add New, and then select Use Default Profile.

The following information will need to be completed:

• Profile name: Choose a name for the profile, such as Gradwell
• Service profile: IETF
• Default access point: Please select your configured WiFi Access Point
• Public Username: XXXXXXX@sip.gradwell.net (Replace XXXXXXX with your extension). Please note the E61 will append sip: to the setting, this is acceptable
• Use Compression: no
• Registration: When needed
• Use security: no

Then click on Proxy server: this will open up another screen. Use the following configuration:

• Proxy server address: nat.gradwell.net (Please note the E61 will append sip: to the setting)
• Realm: newsip
• User name: Your Extension Number
• Password: Your Password
• Allow loose routing: Yes
• Transport Type: UDP Port: 5082

Once the settings have been configured, click back then scroll down and select Registrar server, the following settings need to be applied:

• Registrar server address: sip.gradwell.net (Please note, the E61 will append sip: to the setting)
• Realm: newsip
• User name: Your Extension Number
• Password: Your Password
• Transport Type: UDP Port: 5060

After these settings have been setup you will need to configure the Internet Tel. settings. Return to the connection settings menu and scroll down to Internet tel., Select Options, and then New Profile. Enter a name for it if you wish, and ensure that the profile that you created above is selected in SIP profiles. 

You will now need to power off and power back on the phone for the changes to become active.

To make a call VoIP/SIP call from the phone enter the telephone number as normal, then press Options, then select Call, and select Internet Call. The outbound call will now be placed over SIP.